evilfij
Well-known member
Correct. I did this on the YJ because the stainless would not bend as I wanted it to. Frank has the Frank good solution, but zip tie spacers work fine.Looks like this.
Correct. I did this on the YJ because the stainless would not bend as I wanted it to. Frank has the Frank good solution, but zip tie spacers work fine.Looks like this.
I am on about headlights now (I blame Frank).
Apparently Land Rover is using these LED headlights on their “new” builds.
LED Headlight Land Rover Defender – Customer Examples
For its special series "Last Defender", JLR UK relied on the first-generation Nolden 7" Bi-LED Headlight.www.noldengmbh.de
749UKP though …. BUT THEY ARE GERMAN SO THEY MUST BE GOOD
Thanks VT that is very generous of you, but I would like something stockish looking and the JW are black. I see people fit LED bulbs to hella H4 anyone have any experience with that?
PS you definitely want the plastic there if you value your door cards.
Only very few of the "LED bulbs" for non-headlamp/non-foglamp use available on the market work safely and effectively; most of them are unsafe junk. The ones FOR headlamp/foglamp use are ALL unsafe junk. We will not argue this point.
Packing tape stuck to new parts is the worstI spent 45 minutes scraping the packing tape residue off my new galvanized cappings (by the way goo gone and a plastic razor blade works best). Then I installed a new gas cap (non-locking) and shift knob.
Should get the Morimoto 2stroke LEDs I’m running.I’ll just come tailgate you with my brights on. Not in a Rover, something else that has bright brights and I won’t risk burning my headlight switch.
The clips are great but the break and disappear. Zip ties are cheap and an incredibly easy fix.If you want to secure two pipes/hoses the LR way, check out:
NTC1175
View attachment 24957
DCP3969L
View attachment 24958
DCP3969L is interesting because it swivels to allow pipes/hoses that cross in different directions like John's case. LR had many more clips for nearly any situation. You'll see quite a few by browsing LRWorkshop's clutch hose, brake line, and fuel line diagrams.
View attachment 24974
I made it fit. But I need a shovel with less of an angle, does anyone know who made the shovel for camel trophy circa 1988-1991? It has a black metal d handle and black spade (PS the one I got from Zack is excellent and very well made, I just want the one with the flatter profile).
She has enough holes. Lol. I almost kept it, I still may not get my refund on that and the 21 windscreen hinge gaskets unless the GF runs to the UPS store ….That's why I sent you the shovel mounting kit instead of the shovel. Zero fitment issues
I fixed the lights, I got rid of the washers on the rear 5th door hinges and put a gasket in on one that did not have it. I had messed the lights up. Frank had them working, but she knew I said bad things about the LED so she acted up. I hate wiring. GF went to UPS store to return the package, but it cost me a sushi lunch and an organic grocery store trip, but she did confirm the reverse light was working.She has enough holes. Lol. I almost kept it, I still may not get my refund on that and the 21 windscreen hinge gaskets unless the GF runs to the UPS store ….