I was thinking it would be nice to start compiling a list of the sizes of nuts and bolts commonly used. I put in an Ashcroft transfer box recently and it had all new hardware which inspired me to do the same when resealing a transfer box. I know a lot of people on here are rebuilding their own trucks (or customer trucks) so we should get a list going for those who want to take it to the next level.
I spent $28 to buy all of the bolts for the transfer box I did. All fasteners came from Belmetric (thanks to whoever recommended this company in another thread).
PTO cover - M10-1.5 x 40mm - qty 6 (eliminates 1 stud)
Lower plate - M8-1.25 x 25mm - qty 10
Front side plate - M8-1.25 x 25mm - qty 7
CDL plate - M8-1.25 x 25mm - qty 3
Front housing - M8-1.25 x 25mm - qty 7
M8-1.25 x 90mm - qty 1
Rear housing - M10-1.5 x 30mm - qty 5
M10-1.5 x 45mm - qty 1
Shift lock cover - M6-1.0 x 20mm - qty 4
Hi-Lo shift housing - M8-1.25 x 55mm - qty 6
Transfer box to trans- M10-1.5 x 35mm - qty 2
M10-1.5 x 40mm - qty 2
M10-1.5 x 45mm - qty 1
I spent $28 to buy all of the bolts for the transfer box I did. All fasteners came from Belmetric (thanks to whoever recommended this company in another thread).
PTO cover - M10-1.5 x 40mm - qty 6 (eliminates 1 stud)
Lower plate - M8-1.25 x 25mm - qty 10
Front side plate - M8-1.25 x 25mm - qty 7
CDL plate - M8-1.25 x 25mm - qty 3
Front housing - M8-1.25 x 25mm - qty 7
M8-1.25 x 90mm - qty 1
Rear housing - M10-1.5 x 30mm - qty 5
M10-1.5 x 45mm - qty 1
Shift lock cover - M6-1.0 x 20mm - qty 4
Hi-Lo shift housing - M8-1.25 x 55mm - qty 6
Transfer box to trans- M10-1.5 x 35mm - qty 2
M10-1.5 x 40mm - qty 2
M10-1.5 x 45mm - qty 1