Shearpin
Well-known member
I need to address an intermittent clicking noise from a rear brake on my 110. The caliper on this Salisbury disc conversion appears to be working fine, but I assume there is an issue with the anti-rattle springs or the disc/pads are worn.
The caliper is stamped - Lockheed 3247-637C - which I believe cross-references to Rover’s RTC3380. My usual list of parts retailers don’t list a pad, disc or pin/spring kit part number for this caliper. Do any list members know the part #’s offhand? An part #’s I may find at the local Napa? What’s the minimum disc width for this brake system?
What are members thoughts on the disc mud guards. Mine are rusty and look like a grit and leaking oil trap. Any reason not to remove them?
Thanks again,
Henry
The caliper is stamped - Lockheed 3247-637C - which I believe cross-references to Rover’s RTC3380. My usual list of parts retailers don’t list a pad, disc or pin/spring kit part number for this caliper. Do any list members know the part #’s offhand? An part #’s I may find at the local Napa? What’s the minimum disc width for this brake system?
What are members thoughts on the disc mud guards. Mine are rusty and look like a grit and leaking oil trap. Any reason not to remove them?
Thanks again,
Henry