vtlandrover
Well-known member
Ask not what I have done to my Defender today, ask what I have gotten to make it’s (and my) life easier.
Aluma 7816.
Put a lock on it. Ask me how I came to offering this advice...
Ask not what I have done to my Defender today, ask what I have gotten to make it’s (and my) life easier.
Aluma 7816.
Moved back to the US...Did you move or get a new one?
Any more details on this aux tank?I filled up today!
the most I have put into my 90....soooo close to $100 - still had 4gal left
9394 miles since the R2.8 swap - total average of 18.02mpg
12gal factory + 15gal aux tank
Any more details on this aux tank?
It has a lock. Hopefully one that is way better than the stuff you find on Amazon & Home Despot.Put a lock on it. Ask me how I came to offering this advice...
She probably just wanted to pee on it.Where did I go wrong....
Out with my Dog this morning, at the pet store. As we come out, tell her we're going for a ride. She pulls me over towards a Jeep.... and a Renegade toy Jeep at that.
I cant remember if I posted here...but I posted on my IG. @Braveheart_D90Any more details on this aux tank?
I did promise a photo, so:Not really "did to...", but:
Picked it up at the Port of Baltimore today. Ready to start playing games again. Photos to follow.
I Agree about Zack & RN. He was super helpful on my Marsland chassis processBtw, thats the Rovers North aluminum skid plate. Got from @Z.G Solid, simple design. I recommend it If you need one. Plus Zack and Rovers North are cool. No affiliation, just respect. Several great venders on the board, great community in general.
What happens if you connect a trailer? will hitting the brakes shut off all the lights? (thats not good). also...the amazon link states not for LED...but your reciever light is LED (is it not?)Finally put on the wiring harness I made to convert Euro 7-pin to US 4-pin. I had to add this to make this actually function correctly. But something is still weird. When I tested the pins with a test light on the 4-pin side all seemed well. running, stop, left, right, etc. But when plugged in to my LED 2" received light, only the running light works and when the brake pedal is hit, it goes off entirely? I guess that's better than nothing?
(Embedding isn't working for some reason, here's the video
I think you may have solved it... I bet that's the entire issue LED vs not LED for the light. I'm going to add a small resistor to the ground on the 4 pin side and see what happens. (I don't have a trailer to test it with, but my non-LED test light appeared to be working as it should)What happens if you connect a trailer? will hitting the brakes shut off all the lights? (thats not good). also...the amazon link states not for LED...but your reciever light is LED (is it not?)