WTB MPH Speedo for ROW truck

[supertreeman]

Looking for MPH speedo for ROW truck.

 

[JimC]

Mechanical or electronic? Do you care what the mileage reads?

 

[javelinadave]

Look at the VDO Vision line and ditch the spinning cable.
Plenty of info here:

VDO Gauge Guide

VDO Gauge Guide 300 TDi R380 Boost- 150-1042 2 1/16" Vision Series Voltage- 332-103 2 1/16" Vision Series Oil Pressure- 350-1042 2 1/16" Vision Series Water temp- 310-1052 2 1/16" Vision Series Fuel- 301-105 2 1/16" Vision series Pyrometer- 310-153 2 1/16" Vision Series Many use this EGT probe...

nas-row.com

 

[supertreeman]

Analog. Don’t really care about mileage. Was looking at the VDO guages too..

 

[Napalm00]

Jim is asking about the sender type not the display on the speedometer I believe.

You really should get away from using The stock cable. Using one of the YBE senders and the digital input speedometer makes this an easy job. Or if you're especially adverse to wiring you can just use a GPS sender.

 

[supertreeman]

Sounds like Ive got some more reading to do. I thought this would be easy! Will definitely take into consideration the points and suggestions from everyone. Looking like VDO is the way to go. Thanks for the suggestions

 

[supertreeman]

Actually, Just opened VDO gauge guide (thanks JavelinDave). Now Im thinking of switching over to all VDO gauges. Thanks for the link.

 

[JimC]

Derp, had to edit my post. ”Digital or electronic” isn’t much of a choice...

 

[Napalm00]

All vdo is the way to go. here is a short video showing all the vdo gauges I have in my truck

 

[Mud Ruts]

I have a VDO electric speedo and a cable driven one. Will sell either.