Trailer dash light?
- Thread starter Jeff B
- Start date
Roverman2010
Well-known member
LEDS, brake/ind converter box?? Got a short?
Jeff B
Well-known member
Hmmm...I have rear LED brake and indicators and a LED Relay fitted.
It always had them so I don't know if/when it started...
Pretty sure no shorts anywhere.... at least on this truck!
.
Roverman2010
Well-known member
I have all that stuff too, and checked mine yes mine is always lite to. Just never bother me. Maybe change the flasher unit and see if if goes away? It's the small stuff that keeps us busy lol.
You need the RDX flasher relay if you have LEDs. It is the only one that will make the trailer light work properly.
This: https://www.ebay.com/itm/RDX-4-Pin-...der-/231258888157?vxp=mtr&hash=item35d81a97dd
This: https://www.ebay.com/itm/RDX-4-Pin-...der-/231258888157?vxp=mtr&hash=item35d81a97dd
The RDX LED relays (ebay) have an adjustment knob on the top to fine tune when the trailer dash light illuminates.
I think its all based on current. Changing from Bulb to LED changes all the currents which goofs up the trailer light. Not all LED relays are the same and some don't support the trailer function. The RDX one works.
Edit: Same as Red90 comment above.
I think its all based on current. Changing from Bulb to LED changes all the currents which goofs up the trailer light. Not all LED relays are the same and some don't support the trailer function. The RDX one works.
Edit: Same as Red90 comment above.
Jeff B
Well-known member
Doesnt bother me enough to change relays... LOL
All lights/indicators work perfectly, but this trailer light stays on.
I can pull the bulb if I get to bothered I guess...
.
Jeff B
Well-known member
Yep... all lights and inicators work perfectly.
Hazards are normal(using a Carling switch).
I have Wipac LEDs on the rear(brake,signals,reverse) everything else stock.
I have the relay with the little potentiometer that Paul on D90 sells...
.
The_Vermonster
Well-known member
Do you have inline resistors?