Second row seating upgrade options

[Motorradmark]

To set the stage, 85 ROW LR110 CSW with 60/40 bench in second row.
Would like to upgrade to a left and right side single seat, hi back, that teenagers can actually sit in.

have looked at the RN upgrades and the Exmoor trim upgrade - like but want to run any other options folks have used.
Q1: Do those exmoor trim seats, like the EXT350, come with all the hardware to install, or is there some fab/mod that has to happen?

has anyone used any other decent seats to give the second row folks a better place to sit?
Again, only want a left and right seat, plan to keep center space open for access or may some kind of storage-useful space,

appreciate any recommendations or ideas.

 

[4RF RDS]

So here is what I did and its the easiest way to do it…

1- remove your bench seat
2- disassemble the seat
3- remove upholstery and foam
4- remove the rear backrest
5- inspect the frame
6- repair and paint as needed
7- cut one inch off the legs which attach the seat frame to the seat box
8- reinstall shortened legs to frame
9- reinstall frame and start fiddling to align seats on frame and seat back side to the locking mechanism
10- mark the holes you need to drill
11- drill the holes in the frame to mount the seats
12- bolts the seat to frame
13- mark where the anchor pin need to be drilled in the seat back frame
14- undo the bottom of the upholstery on the seat back to access the tubular frame
15- drill the holes
16- bolt the locking pin bracket to the frame (you’ll need to make a spacer to ensure it lines up properly, this will become clear easily)
17- lock the seat back in place
18- repeat the process for the opposite side seat
19- you have enough room in between the seats to mount another cubby
20- bolt that to the frame as well

good luck

 

[hillstrubl]

I started from a different point on my '94 110 that had 33/33/33 low back "buckets". I bought replacement Exmoor high back seats from Zack at RN, reused the frames and called it a day. They're way more comfortable and presumably stronger.

 

[brdhmltn]

To set the stage, 85 ROW LR110 CSW with 60/40 bench in second row.
Would like to upgrade to a left and right side single seat, hi back, that teenagers can actually sit in.

have looked at the RN upgrades and the Exmoor trim upgrade - like but want to run any other options folks have used.
Q1: Do those exmoor trim seats, like the EXT350, come with all the hardware to install, or is there some fab/mod that has to happen?

has anyone used any other decent seats to give the second row folks a better place to sit?
Again, only want a left and right seat, plan to keep center space open for access or may some kind of storage-useful space,

appreciate any recommendations or ideas.

I've been out of town for the eclipse... Have new second row exmoor seats going in. I ordered EXT010-3RH-BSM and EXT010-3LH-BSM. All the brackets came with them. I ordered left and right, no center to do something similar. Probably putting a Dometic or similar fridge mount in the center.

The black span mondus was about 4 months lead time.

 

[Toyrover]

I've been out of town for the eclipse... Have new second row exmoor seats going in. I ordered EXT010-3RH-BSM and EXT010-3LH-BSM. All the brackets came with them. I ordered left and right, no center to do something similar. Probably putting a Dometic or similar fridge mount in the center.

The black span mondus was about 4 months lead time.

I did the same thing, and love them.