Safety Devices Front 4 -Point Cage

[98 HOO]

Brand new, never installed - RBL1383SSS. I just bought it and when it arrived, I only removed the main hoop from the crate and unwrapped the bottom of the legs to test/measure. I have a series hybrid and the windshield brackets do not work with the cage.... I have about $1,250 in it - will sell it for $1,000 for local pickup. I am in the Richmond, VA area.

Safety Devices Front External Roll Cage

Safety Devices Roll CagePart# RBL1383SSS4 Point external front roll cageBlackFits: Defender 90 - Station Wagon without bulkhead, 2-door Defender 90 - Station Wagon with bulkhead, 2-door Defender 110 - Station Wagon, 4-door Defender 110 - Crew Cab/Double Cab Pick-up, 4-doorUnrivalled...

lucky8llc.com

 

[Mirrajumper]

Does the roof section attach an internal hoop or bracket?

 

[98 HOO]

It bolts to the roof itself, not an internal hoop/bracket.

 

[Mirrajumper]

It bolts to the roof itself, not an internal hoop/bracket.

Well that makes it easier. So there is a backing plate, but no internal hoop for a ROW 90?

 

[Angus]

This is the exact set up the POE trucks had. The A hoop attached to the roof and nothing else. You can add the B hoop for either the hard top or soft top which I highly recommend unless you have a REALLY strong neck.

 

[Mirrajumper]

I didn’t see a “b” hoop in the catalog. Will look again. Something simple like the NAS design that will still allow me to use the back.

 

[Angus]

SD usually only sells the entire cage, not individual parts. They have a D90 external cage that will fit a hardtop.

 

[CaptMilks]

this is a nice cage and at a great price. I think the NAS cage was more like this, rbl1387ssss

http://www.safetydevices.com/i/rollcages/2762.1632228286.jpg

 

[rocky]

The Port of entry 94 Station wagons only had the set up being offered.

If you could buy or make replacement chassis mounts, then a good roll cage experienced shop should be able to make a B pillar set up to connect to this.

 

[JimC]

Safety devices will happily sell you individual parts.

 

[98 HOO]

Bumping - I have a buddy coming down from Maryland in a couple of weeks that could likely RURR up that way if there is interest.

 

[evilfij]

This is the exact set up the POE trucks had. The A hoop attached to the roof and nothing else. You can add the B hoop for either the hard top or soft top which I highly recommend unless you have a REALLY strong neck.

The POE had the softtop style front cage which is 1in lower that’s why you see the bend on the POE cages.