Painless Wiring 30815 Headlight wiring upgrade harness

[Ray_G]

$65 shipped.

Harness is used, was pulled off a RRC that died (head gasket), as it comes back to life the truck will see a different life and thus this is just extra wires. Harness is likely a decade old and a lot of the electrical tape/splices on the wires look crusty. If I were keeping it I'd pull the coverings off and confirm/deny everything and replace electrical tape with shrink wrap.

Here's the harness: https://www.amazon.com/dp/B0006HJP2...TF8&colid=17PDT556WS7HP&coliid=I1QRNSX8JDIVEG

Similar to the ARB/IPF loom (https://www.amazon.com/dp/B004LQHHI...TF8&colid=17PDT556WS7HP&coliid=I13440JLJPKHII)

For those that haven't seen/used it this replaces your headlight connections and pulls power directly off the battery (uses one of the headlight plugs to trigger the relays).

 

[Jeff B]

How timely.... I need one of these and I was going to start piecing a kit together.
Relays look like the weather proof type.

I'll take it if just needs a little fresh e-tape and/or shrinky wrap.



.

 

[Ray_G]

How timely.... I need one of these and I was going to start piecing a kit together.
Relays look like the weather proof type.

I'll take it if just needs a little fresh e-tape and/or shrinky wrap.



.

Jeff-
Relays are solid and def weatherproof type; connectors are all in good shape. If I were keeping it I'd peel the electrical tape off to check all the wiring but the basics of the harness are solid.
r-
Ray

 

[Jeff B]

Sounds good--- make it mine!


So it has Twin Mountain heritage?


.

 

[Ray_G]

Sounds good--- make it mine!


So it has Twin Mountain heritage?


.

It was living at Twin Mtn and was part of stripping out that RRC we just threw a RPi 3.9 into (the 4.2 had a hole in the block). To sweeten the deal, not only does it have Twin Mtn heritage but it was out of a truck serviced by Treasured Motorcars-so it may well have Trevor G fingers laid upon it too once upon a time (or as John put it "there's one of those harnesses he loves...").

Hit me on my gmail (ray.gerber(at)gmail.com) w/paypal and kick me your addy, will get it on the way.
r-
Ray

 

[Jeff B]

PP$ sent

Back 7 or 8 years ago Trevor pieced together a headlight harness for me for one one of the classics (both utilize them)

Classics, like Defenders must have a headlight harness to keep the power out of the switch.

This harness will go in the new project ---

I'll PM you shipping address



.

 

[Ray_G]

Sold, should ship out tomorrow.
Coyote has the ARB/IPF loom-it's a good piece of gear. If our trail truck wasn't going LED (just b/c), it probably would have stayed on her...but let's start with getting it to do more than turnover first.
r-
Ray

 

[Jeff B]

Got it this morning- - mucho thx Ray(and thx for the stickers); now go enjoy your march on Washington!


.

 

[Ray_G]

Got it this morning- - mucho thx Ray(and thx for the stickers); now go enjoy your march on Washington!


.

If I were single, I can tell you where I'd be-in a very apolitical way. If the other half was in the country, I can tell you where she'd be too.

Since neither of those things is true, I instead focused on getting the 3.9RPi motor to work in the RRC we're building for trails up here. It lives, thus life is good.

Enjoy the Region 2 stickers!
r-
Ray

 

[Jeff B]

If I were single, I can tell you where I'd be-in a very apolitical way. If the other half was in the country, I can tell you where she'd be too.

Since neither of those things is true, I instead focused on getting the 3.9RPi motor to work in the RRC we're building for trails up here. It lives, thus life is good.

Enjoy the Region 2 stickers!
r-
Ray

Yes, that would actually be good idea for the single guy.... odds would definitely be skewed in our favor.

I, too, spent the day over a Rover V8. The new-to-me GEMS 4.0 version(which I know very little about).
This relay will be going on this project.


.

 

[Ray_G]

Yes, that would actually be good idea for the single guy.... odds would definitely be skewed in our favor.

I, too, spent the day over a Rover V8. The new-to-me GEMS 4.0 version(which I know very little about).
This relay will be going on this project.


.

GEMS is def a bit modern for you isn't it? In truth I prefer that engine management-esp after spending the past two weekends putting in a 14 CUX and more importantly dealing with troubleshooting setting the timing with the dizzy and such. That said, it lives...and subsequently was put on the lift for a lift/tires/etc....

As you can see, it is a little modified already. Going to be a trail building work truck.

 

[DChapman]

Yes, that would actually be good idea for the single guy.... odds would definitely be skewed in our favor.

Obviously you did not see any of these bulldikes on TV. Looked like something from the state fair.

 

[Ray_G]

Obviously you did not see any of these bulldikes on TV. Looked like something from the state fair.

In truth I didn't see any of it on TV; since I don't watch it-but I have no doubt it was swimming with some butch.

Everybody's gotta eat though.