ionfender
Well-known member
As the title implies this is the integrated bracket that holds both the charcoal canister and the power steering fluid reservoir. Came stock on NAS trucks (not sure if LR used it on other models as well?).
HOWEVER, please note, this bracket had the arms for the power steering reservoir extended by about 2 inches. In one of the pictures I show a measurement of these arms - they measure roughly 4.5 inches from the bracket wall to the end of the arms. For comparison, the stock/unmodified version measures 2 - 2.5 inches.
If you are running the two-piece bonnet prop in its stock position this bracket WILL INTERFERE WITH THE BONNET PROP. Please take note of this as I'd hate for someone to purchase it and then realize it interferes with the bonnet prop's stock location.
$95 OBO shipped CONUS. Any questions let me know.
HOWEVER, please note, this bracket had the arms for the power steering reservoir extended by about 2 inches. In one of the pictures I show a measurement of these arms - they measure roughly 4.5 inches from the bracket wall to the end of the arms. For comparison, the stock/unmodified version measures 2 - 2.5 inches.
If you are running the two-piece bonnet prop in its stock position this bracket WILL INTERFERE WITH THE BONNET PROP. Please take note of this as I'd hate for someone to purchase it and then realize it interferes with the bonnet prop's stock location.
$95 OBO shipped CONUS. Any questions let me know.