Bump stop replacement

[Smob]

Mine are awful - any recommendations on brands to buy? Thanks.

 

[The Dro]

Check with Energy Suspension... I did my Disco I with them.

 

[Tomaco1]

Check with Energy Suspension... I did my Disco I with them.

Any idea which ones fit?
There website is pretty useless.

 

[Jeff B]

Plenty of stock ones available at the parts scrappers...


.

 

[The Dro]

Any idea which ones fit?
There website is pretty useless.

I wish I could remember the part number.

It had a center bolt and I got custom plates to mount it.

This is your best bet IMO...

http://www.paddockspares.com/anr41889p-front-bump-stop-polyurethane.html

 

[Kevin88RRC]

Piggyback bump stop question.... With a lift does one need extended bump stops?

 

[Jeff B]

Piggyback bump stop question.... With a lift does one need extended bump stops?

Depends on the truck and tire size.

On my RRC, with a 2 lift, I modded the stock bumpstops 2" lower.
I was running 265/75's and I didnt want them getting cut if they compressed into the lip of the fender.
Defenders have a lot more fender room.

This is your best bet IMO...

http://www.paddockspares.com/anr41889p-front-bump-stop-polyurethane.html

Jeeez, do the Brits still make suspension components in dayglo colors and anodized metal??

How 'bout black rubber?




.

 

[The Dro]

Bozman has them...

 

[rocky]

Confess my truck doesn't have any......Never hit either. But then the recycled D1 suspension is way too stiff for a 90.

Plenty of choices in bump stops from the usual suspects. http://www.roverparts.com/Parts/90575789 http://www.roverparts.com/Parts/575707

 

[1of40]

Piggyback bump stop question.... With a lift does one need extended bump stops?

If you're damaging your rear shocks you do/will.