19j to 200tdi swap help

Hello family!
I recently swapped a 19j to 200tdi. I used the cables from the 19j and I also used the alternator of the 19j. Radio turns on but no crank or any motor action. Any suggestions on where to start and diagnose the problem? Thank you all!!!
 

lcdck

Well-known member
I'd start with your starter, then check ignition switch. You can jump the starter with your battery to see if it's working. Just disconnect the stop solenoid if you don't want it to run (though it might not anyway).
 

supertreeman

Well-known member
Same as already stated..check ignition switch and that all wires are connected. Should have positive from battery to starter , then white with red trace and brown from ig switch to starter selenoid from memory. Pretty simple.
 
Top