1986 Land Rover ROW 110 SW Trident Green

1986 Land Rover Defender 110 SW Trident Green (2016-11-21 11:20:17)

--Modifications in 2015--

Drivetrain
Rebuilt 200Tdi (11L05913R)
R380-stumpy (50A100614L) replaced in 2020 with a rebuilt unit with HD rear support bearings and taller (0.732) fifth gear
LT230 "20D" 1.6 replaced in 2020 with a "22D" 1.4 rebuilt unit with sleeved casing and heavy duty cross pin
New injection pump
New lift pump
New water pump
Rebuilt alternator
New power steering pump
Terrafirma steering stabilizer
Bearmach adjustable panhard rod
New bushes and mounts all around
New master and slave cylinders
New wheel bearings, hub seals, rotors (front discs), wheel cylinders (rear drums), booster and brake shoes
New Valeo HD clutch in 2020
New Britannica Restorations super duty clutch fork in 2020
Flywheel resurfaced and new Dowty rear main seal in 2020
New ujoints in 2020

Interior
Air conditioning
Mud UK center dash console
Kenwood DNX572BH radio
Mud UK rear door card
Wheelskins steering wheel cover (not shown)
Knightsbridge Overland seat covers (front and middle, not shown)
Wright Offroad acoustic mat (front)
Tractor Supply horse stall rubber mat (middle, rear loadspace)
Exmoor XS Half Leather Heated front seats (not shown)
LED dash and dome lights
Middle row and rear seat belts

Exterior
Paint Code LRC325 Trident Green
FrontRunner Slimline Rack (standard legs)
Terrafirma sliders with tree bars
Mantec rear tire carrier
SDO front grille
Front brush guard has been removed
Truck-Lite headlamps
LED markers
YRM galvy mid-cross member (front tub support) in 2020
YRM galvy a-frame arms, support brackets and new bushes in 2020
YRM galvy outer body mounts in 2020
SDO stainless door hardware in 2020
Galvy transmission cross member in 2020

Wheel and Tire
Rovers North Wolf Wheel 16" x 6.5" (2.75" offset)
Cooper STT Pro 285/75/16


1.jpg


2.jpg


3.jpg


4.jpg


5.jpg


6.jpg


7.jpg


8.jpg


9.jpg


11.jpg
 
Last edited:
Hats off to John at Knightsbridge Overland! - he and his team custom made a seat cover for my middle bench seat to match the fronts. Not for a 60/40 bench, or even a 33/33/33, but a straight-up, 100/0 original big ole one piece bench seat.
 
Changes to the truck are (slowly underway), so revisited the registry and re-added some older pictures. Will get to updates as they happen.
 
Thanks all..much appreciated. It's about to have surgery with a new TC, uprated tranny, clutch, ujoints, and with @Napalm00 's words of wisdom, a new rear main. Plus some more stainless and galvy parts going on while it's apart, along with a glass to blade conversion.

As it sits today in the garage, floors, trans tunnel, seatbox and prop shafts are out.
 
Top