Search results

Gwynn Lewis.

Good weekend, work party for Robesonia Trials next week, let the smoke out of the battery and installed my fuel tank guard.

Are these used to rebuild the injector?

Now that the Vermont loop hole has been closed, its almost impossible to get a Title with just a bill of sale. PennDOT will not decide an ownership claim, that's for a Judge to decide. Once you have proved its your property, then the Judge will issue a ruling which PennDOT will accept. I used...

I'll take em Frank

Made good progress, took the top plate off and found the double nuts loose. I tightened them up and added a little blue loctite. Test drive went great.

No, pretty low down, about an inch or two

After some more searching, it seems the clutch pedal should be 5.5 inches from the bottom edge to the floor; mine is 6.5 inches. But having the LOF master cylinder, maybe the manual settings are not applicable.

Both Slave and Master have been changed within the last 1000 miles, by the prior owner.

I let it cool down for 40 minutes, it is shifting almost back to normal, goes into reverse with no grinding, goes into first every time. So it is definitely heat related, was thinking punched thru fork, but that would not change after cooling down would it?

Took my 91 LHD row 90 out today, warm and muggy day. Doing some around town driving... Got harder and harder to get into 1st gear, 2nd was less problematic. Going to reverse produced a loud grinding sound. This happened once before on a hot day, I had the clutch fluid changed and bled, do not...

I'm registered and planning on attending

I'll do the shop manual

Added an ARB safari bumper and Warn M8000. Installed a smaller diameter steering wheel, re-trimmed headliner installed along with rear plastic trim. Almost done. Cheers Frank! She's come a long way from the old Italian farm truck.

The definition of duty. Godspeed.