rocky
NAS-ROW Addict
Very true.
Interesting... I didn't had any issues with mine.
I used the metal Raptor set up.
Very true.
Interesting... I didn't had any issues with mine.
Me tooI used the metal Raptor set up.
Where did you buy yours?One more thing-the people I bought the speedo from, adjusted the odometer to reflect current mileage covered.
Thanks mdubs! Glad We were able to help each other out.
Anyone who installed help me out,
Fuel- 301-105 2 1/16" Vision series for 200tdi uses stock sender, correct? Thanks.
Yes.Anyone who installed help me out,
Fuel- 301-105 2 1/16" Vision series for 200tdi uses stock sender, correct? Thanks.
Here is what I have currently....
Is this color scheme correct? Or does the 6/8 need to be red, and the 2 black. ThanksLike this?
That makes 6/8 wire (signal wire) red on the brake connector. I was mainly confused if the + (POS) was 6/8, or if signal.Those are the colors that match the STC4637 connector as I understand it (can probably check when I get home). The connector was intended for the brake lights.
See here for details all in one place: http://alre.club/Forum/index.php?topic=72.0 and you can verify the connector pins with the wires.
edit: Look inside the sender for the pin labels and you can verify. #2 at speedo to the + pin on the sender.
Which boost gauge do you have there? Do we need to see vacuum? And what do I need to get to connect the boost to the engine?
I don't remember from memory... I need to look at my notes.Is this color scheme correct? Or does the 6/8 need to be red, and the 2 black. Thanks