Is it possible to hear when the blow off valve is "Blowing-Off" on the 300Tdi ?
If so, what does it sound like? My engine is a stock LR repower kit, & the blow off valve has not been adjusted.
Here's my noise climbing a long grade.
My boost gauge is needle is right up against 15psi. I'm not floored on the accelerator, but if I push it a little more I can hear what I would say is the noise of a under-lubed bearing vibrating. It only take a small amount of throttle to hear this and I can start & stop the noise by pressing or backing off the throttle just slightly.
Thoughts.
If so, what does it sound like? My engine is a stock LR repower kit, & the blow off valve has not been adjusted.
Here's my noise climbing a long grade.
My boost gauge is needle is right up against 15psi. I'm not floored on the accelerator, but if I push it a little more I can hear what I would say is the noise of a under-lubed bearing vibrating. It only take a small amount of throttle to hear this and I can start & stop the noise by pressing or backing off the throttle just slightly.
Thoughts.