Separating engine from transmission

[Ranf5]

I've been trying to separate the engine and transmission for about four hours now. won't budge any more. I'm not sure what I'm doing wrong or what I should be doing different. any advice greatly welcomed and appreciated.
1985 110 3.5 V8 manual transmission

 

[javelinadave]

If all the bolts are out just keep wiggling it.

 

[Daddymow]

A bigger hammer.

 

[SARTech]

Confirm all the bolts are out. If so, use a small flat chile and tap in to seam between motor and transmission. Working your was slowly and from side to side. you should carefully be able to form a larger gap and them move to a larger pry tool. My was very stuck due to corrosion on the guid pins.

 

[Ranf5]

Success
Thank you all for your help