Need help with a part number

javelinadave

javelinadave

Administrator
Staff member
What is the left and right part number for the rubber sill part and the required rivets pictured below? My part number-fu is failing me today.
Thanks!
 

Attachments

  • IMG_9766.jpg
    IMG_9766.jpg
    446 KB · Views: 157
Jeff B

Jeff B

Well-known member
- I did those Puma style doors seals. A little work with a Dremel to redo some of the rubber holes so I didnt have to drill new holes in the door metal.


By the way, can someone recommend a good seal to go around the hood/bonnet perimeter where it contacts the wings? /derail-sorta/



.
 
Jeff B

Jeff B

Well-known member
4RF RDS said:
I put this stuff on mine a year ago and its still working fantastically. The engine bay stays very clean when off roading and the noise is reduced a lot.

BTW good tip on the Dremel tool use on the seal itself, I did that as well, saves drilling holes!

http://www.ebay.ca/itm/157-4M-Small...Weather-Seal-Hollow-Weatherstrip/162089385699

View attachment 2926
Click to expand...

Nice. I just ordered some of that weather seal.

With the Puma door seals, it just made sense to redrill the seals where the plastic "T"s go, rather than drilling new holes in the metal door bottoms.
A lot of mine lined up, I just redrilled some.


.
 
LostChord

LostChord

Well-known member
Jeff B said:
By the way, can someone recommend a good seal to go around the hood/bonnet perimeter where it contacts the wings? /derail-sorta/
Click to expand...

Can't seem to locate any part info this either.

Mine is slowly disintegrating, but was thinking about just using weather-stripping or door seals, or nothing :)
 
You must log in or register to reply here.
Top