LR3 DSC

[phunter]

The dsc comes on easily with cornering on my lr3 hse. Most noted with entering or leaving the highway. This is with normal driving. The truck does the maneuvers to slow the vehicle as you would expect when it kicks in.
The truck is 2007 model with 131000 miles on it. I am original owner. The only suspension work has been front wheel bearings around 80 k miles and front lower control arms twice with last set installed at 115k miles.
if you turn dsc off it seems okay with cornering.
The truck has 255/55/19 Arturro trail blade m/t tires on it with lots of tread left. When I jack the car up and move the wheels front and back there does not seem to be any play.

would the gap tool be the best way to proceed for help or is the dealer for diagnosis my best next step?

 

[SARTech]

Hmmm sounds like an over sensitive yaw or lateral accelerometer. I do not know if a gap tool would help. I have recently purchased a gap tool but haven't played with it. Ill be watching this thread.

 

[jymmiejamz]

Has anyone done an alignment recently or removed the steering wheel?

 

[phunter]

Not recent alignment. No steering wheel work. The mud tires by arturro are the same size

 

[ArmyRover]

When my lower steering shaft was getting sloppy this happened to me frequently

 

[rangerover]

This was happening with mine during every left turn. Turned out that the left-side sway bar link broke. Since fixing it, the issue hasn't repeated.

 

[phunter]

I appreciate the responses. I am stuck taking it to someone since I cannot find a suspension problem.
Any rover shops relatively close to me. WV does not have any. Pittsburgh, Columbus, cincinatti, Roanoke are not too far away .

 

[phunter]

Any recommendations for repair shops in my area ?

 

[crown14]

For future reference, first step when this happens is always check the tire pressures.