Help! Anyone know where to find a 200TDI LR badge?

[Classic4X4]

Hey everyone, Ive been scouring the internet trying to find the green and silver land rover logo for the top of my 200TDI engine. It is 3" lengthwise but all the badges ive seen online seem to be larger. Any tips would be of huge help. Thanks!

 

[AdamSanta85]

For a Disco engine right?

 

[Classic4X4]

here is the engine, not sure if it came out of a disco. Thanks for your reply!

 

[AdamSanta85]

Not sure on the decal part number, but I gave a quick look don't see it depicted on the diagram. The manifold is part number ERR250 which might help your search.

 

[Classic4X4]

Not sure on the decal part number, but I gave a quick look don't see it depicted on the diagram. The manifold is part number ERR250 which might help your search.

Thank you very much! Ive been looking for the part # that will definitely help

 

[Classic4X4]

Found a better picture. Looks like it might be a decal rather than a badge. I remember someone posted a while back about this on a different forum, couldn't find it with the search

 

[Red90]

I suspect it just comes with the manifold. You would probably need to have one made or find another of the right size.

 

[AdamSanta85]

If this is a must have a decal shop can print one. Just measure the dims you need, then find a highish quality image of the LR badge. Convert it to a vector image and you are good to go.

 

[Red90]

Keeping in mind it needs to be good for quite a high temperature.... I would expect the stock ones are printed on foil.

 

[AdamSanta85]

Keeping in mind it needs to be good for quite a high temperature.... I would expect the stock ones are printed on foil.

Vinyl will work. It is only 2 color. Vinyl holds up well on brake calipers (Brembo decals), it will work fine on an intake manifold.

 

[Classic4X4]

Thanks for the input guys. As always super helpful! Looks like I'm probably going to have to have one made. I just have to figure out if the background is White or metallic. Unfortunately I have an addiction to making the little details correct so I know it's going to bug the hell out of me until I figure it out!

 

[RDavisinVA]

Am of the opinion that Vinyl will bubble up.
This is a TDI with a hot intake charge

Why don't you abandon the sticker and install the black TDI cover that will fit your engine?

 

[Napalm00]

You could always print and trace it then paint it on with enamel

 

[Red90]

Engine cover....

 

[rocky]

Agree that it needs the badge. Always assumed the accountants removed it.
As an alternative, would one of the 300tdi ?noise covers? fit?

 

[RDavisinVA]

Agree that it needs the badge. Always assumed the accountants removed it.
As an alternative, would one of the 300tdi ?noise covers? fit?

Yes it will, see picture of engine in post #3.

 

[1of40]

The original is green/white and its is somewhat rubbery. You can put your finger nail in it.

 

[Red90]

https://forums.lr4x4.com/topic/39438-300tdi-engine-cover-on-a-200tdi-engine/

https://www.lrdirect.com/ERR4632-Sound-Deadening-Pad-Rocker-Cover-3/