Ex-MOD 110 Tub Mounting

[KGH]

Going to be mounting an Ex-MOD tub to a 110 chassis. I picked up the tub a few years ago from SHP, and I believe I am missing some bracketry.

Searches for diagrams have been unsuccessful.

If anyone can either take pictures of their rig, or provide docs/links, would be appreciated.

For the curious (JimC!) here is build spec and photos:
200Tdi/LT77 3door 110
Galvy chassis
Rear Ashcroft LSD
Disco axles
New LHD bulkhead
Tub Bulkhead removed
2 sliders in each roof side
Interior tub and floors black truck bed liner
Interior roof sides and roof light grey truck bed lined
Marine Blue/white roof
Half doors with sliders
White wheels
SD external cage

 

[pfshoen]

3 door tub may use mounts different than 5. Search Land Rover Defender 110 tub on ebayuk and you find most/all the pieces and good pics inc/ frame to body brackets, rubber insulators and fender stays. Will give a better idea of what you need.
The steel cross ribs that support the tub floor can rot and are usually covered with so much gunk you can't tell.

 

[KGH]

3 door tub may use mounts different than 5. Search Land Rover Defender 110 tub on ebayuk and you find most/all the pieces and good pics inc/ frame to body brackets, rubber insulators and fender stays. Will give a better idea of what you need.
The steel cross ribs that support the tub floor can rot and are usually covered with so much gunk you can't tell.

Yep, 3 door and 5 are different. It is the MOD side lockers that are giving me issues.

Tub is not on truck. Sandblasted and at painters. The underside and ribbing is in decent shape.

I have plenty of 3 and 5 door trucks here to crawl under, but only 1 Ex-MOD.

I will check out UKBay.

 

[pfshoen]

Idk if MoD trucks mount any differently. The Pulse/TUM/Wolf versions have reinforced chassis.
As far as I know, side lockers can be fitted to any 3 door 110 tub. Depending on how they mount, they may displace/obviate the need for fender stays.
When I search ebayuk for Land Rover military, a lot of MoD manuals come up. A parts book would show it.

 

[expanse]

hope this helps. off my '85 110

 

[KGH]

Super helpful! I may PM you in a few weeks once I get tub ready to set.

These “floor” pieces for the lockers were stumping me. I had them and that crossmember galvanized, and needed to puzzle it back together.

 

[Frenglish]

I hope some of these pics help a bit. 1991 MOD 110 3door. (built in a tent but hey ho)

The tub mounts at the rear crossmember as normal, at the front bulkhead and at the front of the belly lockers. the plate for the belly locker is integral in the mounting as are the little brackets. i think I even have part numbers for all that stuff if you need it.

 

[KGH]

Looks like an order to Mr. Parts (ZG) is in order.
Do you have a PN for these brackets?

 

[KGH]

And a number for these? I assume they are handed.

Your work is amazing on that truck! Love the