RDavisinVA
Technical Excellence Contributor
Transmission is bolted up.
We use 6 long bolts to line everything up and then turn the crank while pushing the engine and transmission together.
Once the first motion shaft splines line up with the clutch plate, the 2 slide home.
Next we remove the long bolts one at a time and replace them with the short ones that will remain.
We use 6 long bolts to line everything up and then turn the crank while pushing the engine and transmission together.
Once the first motion shaft splines line up with the clutch plate, the 2 slide home.
Next we remove the long bolts one at a time and replace them with the short ones that will remain.