WreckITFrank
Technical Excellence Contributor
Does anyone have a 90 without a tub on it that could take a few measurements? I am about to mount up my cross member but need to validate a few numbers. Mine are based off of a bent cross member, so want to make sure they are true.
1. tub mounts to top of cross member (straight edge across tub mounts, measuring down to top of cross member.
2. any static distance for crossmember rear face to any other point on chassis. I measured to back of seat box, but realize most may not have the same setup, or just a bare chassis.
Thanks in advance.
1. tub mounts to top of cross member (straight edge across tub mounts, measuring down to top of cross member.
2. any static distance for crossmember rear face to any other point on chassis. I measured to back of seat box, but realize most may not have the same setup, or just a bare chassis.
Thanks in advance.