Noyac40
Well-known member
Ok, so I decided to forget about doing the calipers today until I can get vented rotors. I couldn't just leave well enough alone so I decided to install the new windshield washer nozzles (not sure who recommended the double sprayers but they are awesome!). while I had the dash pad off, I decided that today was the day I was going to make my new MPH speedo work and began to tear into the dash. I connected the speedo again and was about to test it in the driveway with the gauge cluster hanging and when I started it, the dash began to smoke with something shorting/burning badly. I shut it down and tracked it to the wire from the harness to the volt meter gauge, it completely melted (see pic). Question - Is this something I can buy or should I just reuse the ends and rebuild it. If rebuild, what gauge wire? Sorry for the long winded story but basically should have left the damn thing in the garage today!