What tire size is this?

f1brgls

Member
Looks like ANR1534 wheels but I am not sure what tire size this is?
Guesses?
 

Attachments

  • D90 09(2).jpg
    D90 09(2).jpg
    1.3 MB · Views: 846

f1brgls

Member
Here is another picture i found. I think I'm leaning towards 315/75 (34") I can't imagine they are only 32" as I already have 285/75 on my truck currently.
Opinions on how long (road miles) they will last on 6.5" wide wheels?
 

Attachments

  • D90 03(1).jpg
    D90 03(1).jpg
    1.3 MB · Views: 423

f1brgls

Member
Here is my truck with 285/75 on alloys.
I thinking 315/75 will complete my redneck look
 

Attachments

  • IMG_2724.jpeg
    IMG_2724.jpeg
    2 MB · Views: 587
Last edited:

ionfender

Well-known member
I’m sure this has been asked, what’s the largest tire you can go without a lift?
I think you can generally run a 33” tire on a stock setup with minimal impact. Maybe some rubbing at or near full compression?

With a 285/75 you usually need to adjust the steering stops to avoid rubbing at full lock. With a 255/85 I don’t think that is an issue.
 

donb

Well-known member
I’m sure this has been asked, what’s the largest tire you can go without a lift?

I'm running 35" Swampers with essentially no lift (LR HD front springs). I am running longer bumpstops and I trimmed the fenderflares. Taking off the fenderflares will give you and easy 2" of clearance so my guess is you could fit a 37"
 

ionfender

Well-known member
I'm running 35" Swampers with essentially no lift (LR HD front springs). I am running longer bumpstops and I trimmed the fenderflares. Taking off the fenderflares will give you and easy 2" of clearance so my guess is you could fit a 37"
Pictures please!
 

donb

Well-known member
My old NAS 90 with 315 GY MTR/K's (edit: 2nd pic has a 285/75 SSR on the front)
 

Attachments

  • D90_315_MTRK_driveway_side.jpg
    D90_315_MTRK_driveway_side.jpg
    1.6 MB · Views: 901
  • 2012-02-03_16-19-35_77.jpg
    2012-02-03_16-19-35_77.jpg
    1.3 MB · Views: 563

donb

Well-known member
Jorge's 90 with 37's (345/75-16)
 

Attachments

  • 345_75_16_BFG_KM2.jpg
    345_75_16_BFG_KM2.jpg
    88.9 KB · Views: 474
  • Jorge_37_in_KM2.jpg
    Jorge_37_in_KM2.jpg
    6.5 MB · Views: 760
  • Jorge_37_in_KM2_2.jpg
    Jorge_37_in_KM2_2.jpg
    65.4 KB · Views: 383

donb

Well-known member
Bowler wheels with 305/70-16's GY-MTR/K's
 

Attachments

  • Bowler_16x8_305_70_16_Goodyear_MTR_closeup.jpg
    Bowler_16x8_305_70_16_Goodyear_MTR_closeup.jpg
    292.1 KB · Views: 412
  • Bowler_16x8_305_70_16_Goodyear_MTR_side.jpg
    Bowler_16x8_305_70_16_Goodyear_MTR_side.jpg
    472.3 KB · Views: 762

ionfender

Well-known member
Killer rigs!

Jorge’s truck has truck has to have at least 2-3 inches of lift, doesn’t it? It looks like I could limbo under the sliders...and I’m not very good at the limbo.
 
Last edited:
Top