What rack is this?

[WreckITFrank]

Anyone a familiar with this NAS style rack. Has two crossbars with roll bar clamps for the front. Rear mounts via the "U" shaped ladder , nothing on the drip rail.

In the picture, the top portion is the rear, and the part on the floor is the front. The whole thing is round tube, no flat or square pieces. PO thinks it was pulled off a NAS 90, but doesn't look like a SD rack. Also quite heavy and robust for what it's worth. Thanks

 

[Mack]

Looks like Urban Offroad

 

[1of40]

I was gonna say Wolf/LeLo Fab.

 

[Bostondave]

I like that style basket/platform. Whatever it is, I wonder if it would fit the SD ladder and crossbars. Looks about 4” lower than the SD basket which would be nice for garage parking.

 

[1of40]

http://www.lelofab.com/products.html

 

[WreckITFrank]

Have not found any other pics that match. Checked wolf, and seems a bit different. The open portion of the luggage rail is at the back, as seen by the ladder tabs in the picture. Also included pics of the clamps for reference. Thanks for the suggestions so far.

 

[rocky]

Can you put it on the ground and step back a bit more. Need to see the whole thing in one image.
Thanks

 

[Bostondave]

Can you provide measurements between the mounting points? Trying to see how it’d line up on SD ladder/crossbars.

 

[WreckITFrank]

I can't take it down as I need help to carry it. But I got some measurements.

 

[AdamSanta85]

Thinking about putting it on your truck?

 

[WreckITFrank]

That was the plan, need to get the cage in first, then decide on the garage door issues.

 

[AdamSanta85]

Thats cool. Will that ladder work with your brake lights? The RH side looks OK but what about the LH?

 

[WreckITFrank]

Thats cool. Will that ladder work with your brake lights? The RH side looks OK but what about the LH?

good question. ill have to take a look and see.

 

[rocky]

good question. ill have to take a look and see.

Suspect the drivers side mounts directly to the crossmember.
But as to who made it no clue. Potentially a one off.

 

[vintagepatina]

i'm quite positive that was made by ecr.

 

[Bostondave]

For reference the distance between mounting locations where you have 38? is appx 43.5? on the SD basket/ladder point.

 

[AdamSanta85]

Suspect the drivers side mounts directly to the crossmember.
But as to who made it no clue. Potentially a one off.

You are probably right. The right side looks like it goes on those rivets you drill for a Mantec carrier. Looks like a sweet setup.. I haven't seen a ladder setup like this that works with the regular tail lights.

 

[rocky]

Reckon the ladder bolt holes match up with the hole on the outer edge of the crossmember. The other two holes line up with the outer most crossmember to tub securing tab.

 

[WreckITFrank]

Mystery Solved.
Reached out to a few places. Got some good info from Jeff at Lelofab, as he believes is could be one of his creations, which is obviously fine by me. He stated that the reason the back is open, is likely because the PO had a roof top tent, and wanted access to it from the rear. Jeff also said they don't build any production racks, so each is a per user specs.

Thanks for the input.