WANTED Full width intercooler
- Thread starter Napalm00
- Start date
Roverman2010
Well-known member
Do you happen to know what the mounting bar looks like? thanks
Napalm00
Technical Excellence Contributor
Not sure what you mean? The bottom pegs that fit into the front ac support ?
Roverman2010
Well-known member
I don't know? the web site says mounting bracket. Not sure my 84 has aircon support holes? I have at the moment the Allisport Big side-by-side intercooler, but when or if I fit the International 2.8 the full width intercooler thats been sitting in the loft for years will get fitted. cheers
Napalm00
Technical Excellence Contributor
Ah yes the "mounting bracket" is just two pieces of steel strap that get drilled into the rad support frame that every truck has. The bolt to the face of the intercooler.
If you'd full width is a really old Allisport the has the bosses but no brackets you had
to make it yourself
To see if you have the supports look down infront of the rad frame between the grille. You should see them welded to the rad frame support. My original 83 frame didn't have them
If you'd full width is a really old Allisport the has the bosses but no brackets you had
to make it yourself
To see if you have the supports look down infront of the rad frame between the grille. You should see them welded to the rad frame support. My original 83 frame didn't have them
Roverman2010
Well-known member
Roverman2010
Well-known member
Napalm00
Technical Excellence Contributor
This is what the older style looks like. This happens to be a new manufacturer airtech unit but you get the idea. If you look at the core the tubes and the core have a square face.. The newer allisport ones have a rounded face and what they say is more efficient.
You may have to zoom in to see
You may have to zoom in to see
