They don't.
The black ring is different on all 3.
Your fuel and speedo are vision series. No idea what the other two are.
You have part no's ?
They don't.
The black ring is different on all 3.
I probably do somewhere. I got them from e gauges.Your fuel and speedo are vision series. No idea what the other two are.
You have part no's ?
Trust me... I'm not happy. But I'm not spending another cent.Oh wow... I can't have the different rings. Thanks for the heads-up!
Oh wow... I can't have the different rings. Thanks for the heads-up!
The only way they could be different (other than the clock) is if he bought ones from different series. Sometimes the cockpit and visions get mixed up, but they are different.
Listen cabron...This is Pedro we are talking about. Of course he bought them different places.
I bought mine from e gauges... But years apart.I got all the same rings. I ordered all from one place, at same time. Maybe that?s a good way to make sure you don?t get different ones??
Condensation leads to rust, Rust leads to anger, Anger leads to hate, Hate leads to suffering.
Which PN is the gauge? Vision Black?
Raptor plus new vdo
Where did you find the speedo 437-152?Guys,
I'm having Uncle Doug swap out my 2.5 N/A for a 3.5 L V8 from a RRC with the 14CUX Full Injection from a 3.9. While he has it I want to swap out my gauges for VDO and add a couple. Looking for suggestions on what I should have along with the part numbers. I read through this thread and it seems like it is mostly focused on TDi engines.
Main questions:
1. Are the temp ranges of the gauges below correct?
2. Do I need specific senders?
3. Whats the purpose of having a voltmeter and/or ammeter?
Here is what I think I need. Please let me know if I'm off on any of these:
437-152 85 MPH Speedo (12/24V) 3 3/8" - Vision Black
333-158 6K RPM Tach (12V) 2 1/16" - Vision Black
301-105 E-F 240-33 Ohms Fuel Level (12V) 2 1/16" - Vision Black
310-105 250F Water (12V) 2 1/16" - Vision Black
310-106 300F Oil (12V) 2 1/16" - Vision Black
350-104 80 PSI Oil (12V) 2 1/16" - Vision Black
310-107 400F Trans Oil (12V) 2 1/16" - Vision Black
Thanks for your input.
Very true.Why not just get Doug to do it, and not worry about figuring all this out on your own?
Interesting... I didn't had any issues with mine.I have 437-155. The body of the speedo is a mm or two too big. Just open the hole a fraction and you are good.