Does anyone have a source for these? I know they have been obsolete for a while. I’m also open to alternatives if they look factory once installed
Source for blade style fuse box PRC4826
- Thread starter jymmiejamz
- Start date
Do the wires come in from the back or sides? Most I have seen like that have the wires coming in from the sides unlike the factory part. I could get down with one like that as an alternative if the wires come in from the back side
LiquidMoose
Well-known member
Back side. I used two of these when I couldn't find the PRC4826.
Amazon.com: HELLA H84960101 8-Way Axial Single Fuse Box : Automotive
Buy HELLA H84960101 8-Way Axial Single Fuse Box: Fuse Boxes - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
mitherial
Well-known member
I'd probably use the Hella one from Amazon too, but here is another option: https://www.automotiveconnectors.co...use-holder-black-kit-including-terminals.html
SimonDewing
Well-known member
Went for these bolted down next to the battery to expand the number of fuses/relays in the 110
www.littelfuse.com
Wires all come out of the back so had to fold up some spacer brackets
Rgds
Simon
Fuse Modules - Fuse Blocks, Fuse holders & Fuse Accessories - Littelfuse
Wires all come out of the back so had to fold up some spacer brackets
Rgds
Simon
I think that is the same as the original and isn’t available
20 Way Blade Fuse Box
20 Way Blade Fuse Box | Classic British Quality Vehicle Wiring Harnesses from Autosparks
www.autosparks.co.uk
Thanks again @Frenglish for the Hella fuse box suggestion. It fits pretty well with some minor trimming in the factory glass fuse box bracket.
mgreenspan
Founding Member
I was planning on using this type in my 88”, but I’m going for the side mounted type. I think most companies that sell the generic types have both styles available. That said, they are the generic brands you’ll find at any auto parts store, but I’m sure there are nicer options available at marine parts stores if you wanted to give that a look. My 88” isn’t trying to be a fancy rebuild so I’d recommend looking at one of those where they’ll have a larger selection and higher end options.
Just saw you already got what you needed. I’d look someplace like that in the future, though.
Just saw you already got what you needed. I’d look someplace like that in the future, though.
I specifically wanted the wires to come in from the back on this. There are tons of options with side terminals though
Napalm00
Technical Excellence Contributor
This looks great do they come with terminals ?
No. On the back side of this panel there are male spades. I am going to use female spades I buy from Belmetric that are really thick like factory ones. You definitely need a ratcheting crimper for these ones
I just used the standard non locking spades. There is a good amount of room back there for the harness with this fuse box. I just installed them today in a customer’s 110
erover82
Well-known member
Apparently Britpart is now distributing these for Lucas Classic.
Fuse Block | Britpart
Lucas. Classics live forever. Since the very first car wheel on the very first car hit the road over a hundred years ago, Lucas has been at the...
www.britpart.com
KGH
Well-known member
Nice find!
CamelTrophy96
New member
I have a new one here if you are still interested (PRC4826). I was going to use it in my conversion but now do not need it.