NAS front sway location help

[lithium1330]

would someone with a NAS who can take a couple pix of your front and rear sway bar link setup.

Here is pic of the front sway bar & drag link. I think the sway bar should be above the link.
Thanks!

 

[uc4me]

Here ya go. 97nas. My swaybar is above the link in front.

 

[lithium1330]

Thanks for the pix!
I got the rear correct...need to re-do the front!

 

[Z.G]

Common mistake, results of driving like that can be pretty disastrous though!

 

[uc4me]

To further add (or ask), are those sway bars supposed to move or flex a bit with the axle at the bushing? Not sure if it should be locked tight as possible or meant to flex a bit.

 

[Z.G]

It does flex a small amount because of the bushings, and it's not very tight on there. Torque specs below

 

[lithium1330]

Common mistake, results of driving like that can be pretty disastrous though!

can you elaborate what could go wrong? I'm going to correct it, but curious about severity of the problem.

 

[Z.G]

can you elaborate what could go wrong? I'm going to correct it, but curious about severity of the problem.

My coworker installed it underneath and it mangled the track rod causing the wheels to point outwards.