NAS Front Bumper

Hub030

Member
Looking for a front bumper with the blinker cut outs from the 93 110 NAS and 94 90 NAS style. Thanks
 

JimC

Super Moderator
Staff member
I was gonna say, I think your best bet is to just modify an new bumper. The light is a standard design and size used on trailers and commercial vehicles. I’m sure you could get someone to cut the opening for you - like a trailer supply place or whatever.
 

Hub030

Member
Thanks. I'll get one ordered. Do you know any places in the NOVA area that could cut the holes?
 

JimC

Super Moderator
Staff member
I’m in Fairfax, you can take measurements of my bumper for a template if you want. There‘s probably someone closer, but I’ve had really good luck with the guys out at Universally Modified in Sterling who don’t mind doing odd fabrication jobs. Ryan runs the front office and is really helpful.
 

javelinadave

Administrator
Staff member
You can also use a hole saw and an angle grinder with a cutting wheel.
Measure twice and drill/cut once.
 

JimC

Super Moderator
Staff member
That’s a bigass hole saw, I’d be worried about the quality of the cut without a drill press.
 

lordhelemt

Well-known member
That’s a bigass hole saw, I’d be worried about the quality of the cut without a drill press.

Without a drill press you may break your wrist.
I’m a little closer than Bill if you want me to cut it with my plasma torch. If you or Jim can send me the exact dimensions (or a good to scale trace) I can cut a template for the torch to follow. Can’t guarantee a perfect cut but it should be close. I’m a little busy right now so we’d need to schedule in advance
 

JimC

Super Moderator
Staff member
Those lights have a nice wide rubber lip around them, so you can be a little imperfect on your cuts. Happy to help with the layout.
 
Top