Help on Door top

[Mdubs]

Finishing up Garrison Outfitters anti-rattle kit install and my front sliding piece of glass is not connected to the sliding rail in any way. The channel it fits into is narrower and shallower than the channels around the perimeter of the door, so I can’t use the left overs from the kit.
Any suggestions on how to get the window to adhere to the sliding rail?
Picture included for clarification

 

[Mdubs]

Pics

 

[JimC]

You mean you glass slides inside the channel that slides on the rail?

there is supposed to be a strip of glazing rubber in there. As with most things, I just use some thin pond liner and cut down the excess. It’s a press-fit.

 

[Mdubs]

Thanks Jim. I ended up using windo weld. We’ll see if it works.