Does this New Ignition wiring look correct?

[Ozzie]

Hi folks!!
1988 LR90
With a 96 300tdi/R380/lr230

There are barely ANY original wires in this 90.
So I cant go by any colors. Just direction.

After exhaustive searches I find all kinds of different directions as to how to wire this new style switch.

This seems to be one of the most found does it make sense?

I'm running new wires and new fuse boxes so I would love to start at the switch and go from there.

Thank you,
Ozzie

 

[Napalm00]

Can't tell you anything except for the brown from the battery is not supposed to be fused. It's hot unfused

 

[Ozzie]

I went ahead and created a small harness to plug into the back of the Ignition switch and then used a tester to test everything out and I got it correct finally..

Here are my findings
Pos 1. To starter.
Pos 2 (Double Spades) Hot from Battery, You can connect a wire to the 2nd spade and feed your hot fuse block if you'd like. To power things like headlights, hazards and horn.
Pos 3 out to IGN only circuits.
This would be circuits that you only want to have power when the Ignition is in the run position it does not interrupt when actually starting the car.
Pos 4. Doesn't exist on the switch.
Pos 5. Connects to the glow plug timer and also your ACC circuits this position interrupts when actually starting the car but has power in both ACC and IGN positions..