Camel Trophy Brush Guards

Z.G

Well-known member
Hey all,

There has been some recent communication that may open up the opportunity for a last run of the Brownchurch Camel Trophy brush guards. We would have to buy quite a few of them(30) to make it happen, so we would need several commitments to proceed.

It is not guaranteed, but there is hope. Please email me if you're willing to setup an order. I expect these to run around the same as they were when we were selling them previously, roughly $789. Zack@Roversnorth.com

Below are a couple photos in case you don't know/dont remember what they look like
Screen Shot 2021-02-10 at 9.02.23 AM.png
Screen Shot 2021-02-10 at 9.02.57 AM.png
 

Z.G

Well-known member
I wasn't aware they were galvanized before, I thought they were just powdercoated? I expect them to be the same as were supplied a few years ago when we could still get them, but if galvanizing is an option we will likely opt for that as well
 

WreckITFrank

Technical Excellence Contributor
I wasn't aware they were galvanized before, I thought they were just powdercoated? I expect them to be the same as were supplied a few years ago when we could still get them, but if galvanizing is an option we will likely opt for that as well
That's what I meant. I have no idea if they were before, I just meant along with the current RN line of things. I'm down either way.
 

Z.G

Well-known member
That's what I meant. I have no idea if they were before, I just meant along with the current RN line of things. I'm down either way.

If Brownchurch is unable to supply them, there has been talk of producing a copy of them with our manufacturer, which would indeed be galvy/pc'd. In that situation they would likely be less $$ and marketed as a replica
 

WreckITFrank

Technical Excellence Contributor
Forgot to ask, I assume this is the later, tube type winch bar rather than the flat bar sides?
 

chris snell

Administrator
Callsign: NW5W
Staff member
The best looking accoutrement for a Defender, in my opinion. Some piece of shit backed their SUV into mine at the coffee shop and scraped the powder coating off the side but didn't hurt the bar at all. I assume that it fucked their car royally and I hope it really did because they didn't leave a note.
 

SaintPanzer

Well-known member
DAMMIT! I want one, but it's at least 27 more months before the Federales let me get the truck in the US... and shipping here would be prohibitive.
 
  • Like
Reactions: Z.G
Top