El Pinchi
Well-known member
I need to remove the front windscreen to replace the upper/lower foam seals plus do some rust repairs on the outside of the bulkhead. So my question since I have the SD external roll cage, do I have to remove the top of the roll cage from the inside of the 110 and unbolt the roof and the bulkhead to windscreen brackets to remove the windscreen?
Or can it be removed by just removing the bulkhead to windscreen brackets?
There isn’t much room maybe about 3/4 between the roof and roll cage.
See pics
Thanks in advance for any advice!
Ed
ps I don't know why some pics post sideways?
Or can it be removed by just removing the bulkhead to windscreen brackets?
There isn’t much room maybe about 3/4 between the roof and roll cage.
See pics
Thanks in advance for any advice!
Ed
ps I don't know why some pics post sideways?
Attachments
-
7F5B794A-412F-49E5-8E0D-9B3352BE37A5.jpeg63.2 KB · Views: 164
-
4643F575-4E0B-4937-A240-EE2E1834F25D.jpeg62.6 KB · Views: 156
-
230E34A5-A76C-4AF8-BAC1-24E57BBDFD49.jpeg77.8 KB · Views: 169
-
8234B21E-6B56-441F-AD1E-A615836F794F.jpeg62.6 KB · Views: 165
-
F042FF69-7674-4C12-9431-2A58874B6572.jpeg83.3 KB · Views: 161
-
11DFB8D7-41A7-4DED-B2EB-978BAC333D2F.jpeg128.7 KB · Views: 170
-
98C458B1-81E2-4A77-97AF-DDDF35FABC3D.jpeg79.2 KB · Views: 169