1988 LHD White Soft Top 90

The Dro

Illustrious
Time for someone else to enjoy the truck.

I’ve owned this truck for over 4 years and done all the work myself, with the exception of the engine swap.

The truck has a good running 2.5TD aka 19j engine. Don’t know the actual mileage of the engine. The engine will always start on the first crank. It blows the usual smoke when cold. The LT77 shifts as it should, no know issues that I know of. It has 33" tires on 15" steelies.

The work/parts done are… (All parts new)

Engine/Transmission parts replaced:
Thermostat 74C
Engine mounts
Fan/Alternator Belt
Water Pump Bypass Hose
Top Radiator Hose
Bottom Radiator Hose
Engine Feed and Return Hose
Pipe to Heater Hose
Clutch Kit - Heavy Duty
Clutch Fork HD
Clutch Push Rod
Pivot Plate
Clutch Clip Release
Clutch Slave Master Plate
LT77 Retention Bearing Clutch Release
Clutch Release Lever Slipper
SeriesDefender Dorman Clutch Master Cylinder Kit
SS Clutch Hydraulic Hose
Power Steering Belt
Electric Fan
Electric Fan Controller
Radiator

Interior parts replaced:
Lower Dash Trim
Recovered upper crash pad
Recovered wiper Cover
Gear Shift Knob
Transfer Case Knob
Costco Floor Mats

Raptor Engineering Deluxe Binnacle with Silver Bezel

Raptor Engineering Defender Binnacle Mount

Electrical part replaced:
All lamps
Blue Sea Fuse Blocks


Suspension parts replaced:
TerraFirma Shock & Spring Kit: Medium Load - TF202
TerraFirma Heavy Duty Shocks Towers - TF504
Front Isolator Spring - RBC100111
Front Shock Polybushing Kit
Rear Shock Polybushing Kit

Steering parts replaced:
Heavy Duty Track Rod and Drag Link - RNE448HD
TerraFirma Steering Damper - TF832
Steering Damper Black Boot

Body parts:
Windshield and Seal
Headlamp Finishers
Front Grill
Rear Spare Tire Carrier
Military Canvas
Black Wing Top Diamond Plate Cover
Black Rear Quarter Panel Diamond Plate Cover
Rear Swing Away Tire Carrier
License Light CB Antenna Mount

Hand Brake replaced:

Handbrake cylinder, springs, pads

The passenger side footwell needs replacement. I have the new panel.

Swivel balls and seals replaced.

The rear crossmember has some rust areas, nothing major. The rest of the bulkhead and frame are fine. The paint is faded but doesn’t look that bad. The rear cargo area is rough… not bad, but rough. I was planning of lining it but never got around it. I just did the tunnel covers and floor panels. It has a few holes on the back panels.

I converted the fuse block from the Lucas to Blue Sea ST Blade Fuse Blocks.

The spare is an alloy. I flipped it to fit store the GTT ;)

You’re welcome to come see it for yourself. I'm not in a hurry to sell.

Truck Only!!! $19.5k OBRO
 

Attachments

  • 01.jpg
    01.jpg
    2 MB · Views: 630
  • 02.jpg
    02.jpg
    2.5 MB · Views: 812
  • 03.jpg
    03.jpg
    2.8 MB · Views: 623
  • 04.jpg
    04.jpg
    1.6 MB · Views: 602
  • 05.jpg
    05.jpg
    1.6 MB · Views: 600
  • 06.jpg
    06.jpg
    1.4 MB · Views: 565
  • 12.jpg
    12.jpg
    670.4 KB · Views: 529
  • 13.jpg
    13.jpg
    610.1 KB · Views: 491
Last edited:

The Dro

Illustrious
Interior
 

Attachments

  • 07.jpg
    07.jpg
    2.7 MB · Views: 326
  • 08.jpg
    08.jpg
    2.9 MB · Views: 340
  • 09.jpg
    09.jpg
    2.7 MB · Views: 348
  • 10.jpg
    10.jpg
    2.4 MB · Views: 318
  • 27.jpg
    27.jpg
    1.4 MB · Views: 315
  • 28.jpg
    28.jpg
    698.9 KB · Views: 307
  • 29.jpg
    29.jpg
    651.8 KB · Views: 300
  • 30.jpg
    30.jpg
    1.5 MB · Views: 314
  • 31.jpg
    31.jpg
    1.4 MB · Views: 315
  • 32.jpg
    32.jpg
    1.3 MB · Views: 313

The Dro

Illustrious
Undercarriage
 

Attachments

  • 14.jpg
    14.jpg
    2.4 MB · Views: 319
  • 15.jpg
    15.jpg
    1.8 MB · Views: 305
  • 16.jpg
    16.jpg
    2.1 MB · Views: 301
  • 17.jpg
    17.jpg
    2.7 MB · Views: 308
  • 18.jpg
    18.jpg
    2.1 MB · Views: 296
  • 19.jpg
    19.jpg
    2.5 MB · Views: 297
  • 20.jpg
    20.jpg
    2.6 MB · Views: 315
  • 21.jpg
    21.jpg
    2.6 MB · Views: 289

The Dro

Illustrious
Front end
 

Attachments

  • 22.jpg
    22.jpg
    1.5 MB · Views: 271
  • 23.jpg
    23.jpg
    1.5 MB · Views: 270
  • 24.jpg
    24.jpg
    1.3 MB · Views: 270
  • 25.jpg
    25.jpg
    1.3 MB · Views: 271
  • 26.jpg
    26.jpg
    1.3 MB · Views: 280

The Dro

Illustrious
Tub
 

Attachments

  • 34.jpg
    34.jpg
    4.5 MB · Views: 303
  • 35.jpg
    35.jpg
    3.4 MB · Views: 344
  • 36.jpg
    36.jpg
    2.5 MB · Views: 281
  • 37.jpg
    37.jpg
    3.6 MB · Views: 286
  • 38.jpg
    38.jpg
    3.7 MB · Views: 297
  • 33.jpg
    33.jpg
    3.6 MB · Views: 296

Uncle Douglas

Well-known member
Callsign: delete
Is this item still available? If so I will send you a code to enter on google so that I can verify you are a real seller.
Once I have verified you are a real seller I would like to have the vehicle professionally inspected. Is the home in the pictures included in the price ? Whats the lowest price you will accept ?
 

mgreenspan

Founding Member
Is this item still available? If so I will send you a code to enter on google so that I can verify you are a real seller.
Once I have verified you are a real seller I would like to have the vehicle professionally inspected. Is the home in the pictures included in the price ? Whats the lowest price you will accept ?
You forgot to start off with saying, “I have been looking for a 1988 LHD White Soft Top 90 for a long time.”
 

xplorutah

Well-known member
You really should try BaT. A blue V8 sold there for your asking, and I think yours has a LOT fewer issues.

Although if I were in the market this is what I would buy and put a straight 6 in it if it would fit.
 

The Dro

Illustrious
Took the vehicle for a Pre Purchase Inspection at Overland 4x4.

Please PM for further information.
 

The Dro

Illustrious
Truck is getting new swivel balls and seals...
 

Attachments

  • 20200710_172901.jpg
    20200710_172901.jpg
    322.5 KB · Views: 208
  • 20200710_172912.jpg
    20200710_172912.jpg
    287.8 KB · Views: 203

Uncle Douglas

Well-known member
Callsign: delete
20hrs left........
Have a rapier bed here, kinda cool will make a camping trailer with it if ever get a minute.
Galvanized the HD Rapier chassis and put it under my 130 hcpu.
What ya gunna do Nervous Nelly ?
 
Top