Search results

  1. M

    1995 NAS Defender A/C Vents

    Vent, but which one? Does not seem quite right: https://www.thingiverse.com/thing:4149606 (likely RRC / 97 vent)
  2. M

    1995 NAS Defender A/C Vents

    I'd be interested in those depending on final price. I think I removed (broken?) the round ones and I'm missing fins from either the outer or the inner vents. Just so that it hurts a little more, here are the Rovers North/Genuine prices from back-in-the-days:
  3. M

    A/C line fitting thread/pipe size/spec?

    The metal portion of my A/C tubing (drier side) has rubbed and has a hole and needs to be replaced or repaired. Does anyone know the size of the thread/tubing so I can order a replacement (custom lines will be cheaper than OE replacement it seems). (If that matters, and,, it might, this was the...
  4. M

    ANARC: looking for seat on Thursday afternoon

    Looks like the ANARC event really starts on Thursday morning. So I’d need to leave Wed. My son has a school test he can’t skip on Thursday morning and I’m looking for a seat for him Thursday afternoon from someone leaving/passing by the northern Virginia area -or- eventually that can meet him...
  5. M

    Defender U.S. Duty/Tariff Rates

    I have only looked at the D90's import rulings and found them fairly consistent. From what I read, you have to make sure the passenger carrying area is designed for passengers. If this is a temporary set up and can be used for carrying good (foldable seats for example), then this is 50-50...
  6. M

    D1 front and rear bumper

    Looking for an RTE, SG or similar style front winch bumper (e.g. not an ARB) for a D1. Looking for a rear bumper that protects the sides of the body but does not require trimming. Bonus points if said bumpers would be designed for a body-lifted truck, but…. Beggars can’t be choosers…..
  7. M

    Salisbury end play?

    Yes there is! Used some left over to secure the old half shaft to the old flanges. That’s a great spare set! :)
  8. M

    Ignition barrel: diagram?

    I left the ball out for now. But if you have any picture for how it is supposed to be, I’d appreciate it! :)
  9. M

    D1 with body lift: rear/front bumper options?

    SG makes D1 bumpers. No provision for body lifts.
  10. M

    [Free] LR3 blower motor

    Works. Replaced mine because I cracked the fan while taking it out while running an AC issue diagnostic. Fan blade is still attached to it, but I might remove it to save you on shipping (3lb 6oz without packaging). Just pay for the ride and I’ll drop it off at usps, fedex or ups.
  11. M

    D1 with body lift: rear/front bumper options?

    Does anyone have first or second hand information to share regarding front and rear bumper options./pitfalls/etc for a D1 with a (2" in this case) body lift? I'm investigating the build vs buy route and before I start reaching out to vendors (for the buy part), I'd like to understand what has...
  12. M

    Free, wheel lock with plastic case

    Yep, that's the code you need if you need to call the manufacturer to get a replacement for it.... Don't lose it! :) I think I was looking at the manufacturer web site earlier this week for someone stuck with a Disco Sport at a tire shop because he did not have the proper socket to undo his...
  13. M

    Free mechatronic sleeve (unused)

    Seems to be the sleeve and gaskets. I need to replace mine (slight leak) and could use it.
  14. M

    Doors: rebuild or replace?

    Is it worth it to rebuild doors (metal frame replacement or bottom portion repair) or not worth the time and money (as I would not be doing the work)? The skins are ok with some corrosion in the bottom corners but no too bad.
  15. M

    Ignition barrel: diagram?

    My ignition barrel assembly was sticking some time ago (many years ago). I took it apart, did whatever to fix it. did it again recently and I took it apart again. Now, this time I did not pay enough attention and I’m left with a single metal ball and I can’t figure out where it’s supposed to...
  16. M

    Leak under defender

    I am not helping, but I -think- I fixed my front-output leak (seal was worn), and now it seems to be leaking from the top of the transfer box. You should really clean everything on the box and see where it drips from before making assumption (like I did/do...)! :)
Top