Search results

Time to let her go, for sale is my "1984" "D90". Quotations because there is little if anything left of the original vehicle since the rebuild. Closer spec would be a 95 300TDI except with everything replaced in the last several years I purchased this defender in 2010 from the owner in...

I have my original 2.5NA wiring harness that is surplus to my needs: similar to this AutoSparks Harness Minus the later fuse box. Main loom only. RHD (which is different slightly I believe due to location of binnacle ect, I imagine it would be relatively easy to modify for either vehicle)...

So I have what I think are D1 axles front and rear (discs front and rear) which I believe to be 24 spline. Front: Could be a D1 tube with my original swivels bolted on? Wide (52MM radius arms) Caliper non-vented Pins for Pads (appear to be too long, maybe for vented calipers?) Swivels (could be...

Few questions: 1. Are the wheel bearings pretty standard? I bought a full set but cannot seem to locate different part numbers for different axles. 2. Anything else I should plan on refreshing (going to do the drive flange seals while I am at it). Would rather not do the job twice Cheers

So I was driving last night, 15MPH engine sputtered and died, quickly but not catastrophic sounding (in fact no sound at all). Presuming operator error (even the best of us stall sometimes?) I immediately went to restart the vehicle. Starter cranks (weakly, seemed as if there was resistance at...

I have a fuel Sedimenter that is surplus to my needs Delphi/Lucas/CAV FDE-5836B120 Clear bowl, box is a little shop worn, brand new as best I can tell. Thread: 1/2-20 UN Looking to get what I paid for it, $75 free shipping CONUS

I need one of these for the 'Port' side of my truck (when viewed from the front, Right hand side), I believe this is considered LH MRC8926. https://www.lrworkshop.com/diagrams/land-rover-defender-body-chassis/body/front-wing-assembly_52677#19 I believe it is #19 in that diagram. If anyone has...

I have the air filter canister from my 300TDI setup for sale Part number: ESR2102 Was painted at some point, looking for $60 plus the ride PM if interested

Just found this after going through my parts bin for my build. This is a new Lucas brand PRC3900 switch in the box. $40 shipped ONO

I have a pair of COMPLETELY stainless front bumper recovery shackles for sale: Paid $120 ea plus $60 shipping for them, Will sell them for $130 shipped each or $250 for the pair shipped They mount like this Send me a PM, first licked first shipped, will get a label tomorrow!

So a long, long, time ago I floated the idea of an OM606 into a Defender. There were some offerings and examples out there but progress on that front had been very slow and there weren't a lot of options or information on the completed swaps. Happened across some photos of a swap the other day...

So I have been putting together some pieces on this as to what my stereo setup will be. Lots to consider given the limited space on a defender dashboard. Basically I have toyed with so many options but have come up with what I think might be the best possible solution: Alpine Halo 9 Seems...

I have the following removed from my truck, all OEM Land Rover: 2 front radius arms (wide) (bushings in place) $150 2 rear trailing arms (stock) (bushings in place) $150 track rod (with ball joints) $50 panhard rod (bushing, poly, in place) $50 steering arm (includes one ball joint, goosneck...

I have a set of front door glass I removed from my vehicle this week. Starboard side glass has some light scratches from what appears to be someone using screws too long on the push button door lock mechanism. Think I captured it in the photo. Windows are in decent shape. I think they are...

FTC5200G $40 Shipped PM if interested

Have a set of ProLine Radius Arm bushings for sale: (4) NTC6781 (PLS060) (4) NRC4514 (PLS028) How's $20 shipped sound? PM me if interested

Got some inquiries on the subject so it seems pertinent to post a parts list with an installation post to follow. My truck is a 300TDI with a long bell-housing R380 (not stumpy, see below) but the parts below should be identical with the exception of the HD Throwout Bearing. 200TDI vehicles...

I have a laundry list of things I am going to be doing to my 300TDI 90 in the coming weeks, would pick a weekend after June 17th (Annapolis MD area) Front Suspension Front Steering Arms/Panhard Rod/radius arms 300TDI Clutch/Slickshift/throwout bearing 300TDI Turbo/Timing Belt/Rear Main seal...

So I am driving yesterday and hear what seems to be something getting spun and striking the body on the underside of the defender. its a 'loose change sound' that doesn't seem to be consistent but I have to presume is coming from the transmission bellhousing. I heard it several weeks ago...

So I have been fiddling with my seatbox pretty extensively these past few weeks and discovered I am missing what appears to be a spacer between the seat rails and and the seatbox. Can everyone confirm what appears to be a 3/8" washer spacer below the rails? I have been having a bitch of a...