Search results

Tossing one out to the masses. I'm on the hunt for a P38 seat belt buckle, passenger side. All my hunting points towards ones with a wire connector for warning chime. I did not see any wire on this buckle. Truck is a '97 import (2.5TD).

the lines should be polyamide. you can get the line and a host of fittings from belmetric.com. Use hot water (not flame or heat gun) to warm any fitting and polyamide to press to join. Also warm water to make bends They also sell a host of banjo parts

https://www.lucari-solutions.co.uk/luc-hd110g-1.html looks like this unit

Bigger air appliances: Tire machine, plasma cutter, sand blaster, some lifts (my old 4post had air unlock). I just spent a silly amount of time installing air lines in the 'new' shop, so if there is a chance down the road, run lines now. Once the shop is full, it's 10x slower/miserable. Rapid...

before you do the repair, mark the holes and the hardware that leak, unless you fit new hardware. might save you some pain if leak comes back. have any of the holes been repaired with a coil? coat both sides of gasket in RTV (not just a bead, a nice thin but not too thin smear over the entire...

this is how I rolled home VT to ME.

Nice! They're cool little trailers. I ran a BDR behind my 110 for summer of 2023. I tore the hubs down, rebuilt with fresh grease and bearings and just ran it. tossed a set of wolfs w/ 255/85's on em. did great. was an event to back up... tire carrier was a bit tight, but you can rotate hitch...

Not sure it'll fit all these D2 owner's key fobs with their glittery doo dads :ROFLMAO:

Bit of an odd ball request. Just finished build out on my shop. Looking for a rad key box for the shop. thought i'd see if anyone has one thats got a patina/vintage feel or maybe some history. The building is a 50's era gas/service station.

Your presentation is worlds better then my packaging job :LOL:

I'm 100% that guy. UPS package headed out this morning with Thursday delivery.

at least they're not rocking sawtooth's :sick: /s

Selling for one of our customers. Set of 4 g-wagon wheels and tires. Used. price: $300obo location: Freeport, ME For now, pickup only

I approve. they're thick and have a nice click on each end of rotation so it can't just jiggle and read incorrectly. ordering 2 more for other rigs.

I'll give one a rip.

I've got a big boy CDI 3/4 drive that goes up to 250-500 or 600ft/lbs. Recent addition to the box was a 150?-300ft/lbs snapon that beeps, blinks and does other fun stuff. few other CDI units for the smaller stuff.

this seems to be your issue no? is the needle clogged or sticking? float jammed up?

It's tough to find a paint shop that'll work with you. best to keep it simple when you do find a shop. "I need A B C painted X color". disassemble and reassemble yourself. QC upon pickup.

Not sure if this attachment will work. All Teraflex part numbers I believe edit: I made these measurements a few years back to document as I had a customer rig in that had trashed bushings. Think I just used stock rubber @ the chassis to get them running again as the teraflex units were NLA or...

Have you confirmed if power is coming out of the column switch when you press the button? At the same time, you can test continuity between the pin/plug on the harness (under the clam shell @ column) and the spade terminal at horn. Does the horn have a healthy ground? Do you have a test light...