GynormousMellon
Well-known member
I have a 1993 NAS 110 and when I moved it yesterday to sweep the floor, the screw shown in this post, was on the floor under the 110 about where the trans and T-case are located. I crawled under and can't find where it goes unless whatever it was holding on is also missing. Don't know how long it has been on the floor or when it fell off so whatever it was securing may also be gone?
I do not have any checker plating and the NAS is unmolested and is original except for an upgrade from rear drums to disk brakes.
The screw is metal, about 7/8th of an inch long, Hex head, 5mm and has MSD printed on the head along with 10.9.
It doesn't have any oil or fluids on it, I checked and all my fluids are topped off and surprisingly rust free. It is made of metal, it sticks to a magnet.
Any ideas?????
I do not have any checker plating and the NAS is unmolested and is original except for an upgrade from rear drums to disk brakes.
The screw is metal, about 7/8th of an inch long, Hex head, 5mm and has MSD printed on the head along with 10.9.
It doesn't have any oil or fluids on it, I checked and all my fluids are topped off and surprisingly rust free. It is made of metal, it sticks to a magnet.
Any ideas?????