What have you done today to your LAND ROVER (Non Defender)

Roverman2010

Well-known member
New boots for the D3
Continental Terrain Contact AT 255 /55-19

About to do a run up to the Moutain Camp in NM. Will see how they handle mud and dirt roads.
 

Attachments

  • IMG_1304.jpg
    IMG_1304.jpg
    398.6 KB · Views: 301

rocky

NAS-ROW Addict
In better news, finished up replacing the springs and shocks on my m416 trailer. Only a few weeks of procrastination during the job. Definitely education moments during this. Thanks to Bostondave for coming over at the beginning.
 

Tbaumer

Technical Excellence Contributor
Replaced the reverse light switch. Now I can almost see when I back up! :) Reverse light upgrade is on the list.

IMG_6691.JPG
 

rocky

NAS-ROW Addict
Mine got to play with his buddies in Vermont.
 

Attachments

  • A5AB2E38-96C0-4971-8DC4-B1B6B5373627.jpeg
    A5AB2E38-96C0-4971-8DC4-B1B6B5373627.jpeg
    1.8 MB · Views: 332
  • 94D37934-F649-497D-9AC8-472FDC9FB76D.jpeg
    94D37934-F649-497D-9AC8-472FDC9FB76D.jpeg
    2 MB · Views: 337
  • F280FA9F-048C-4EF8-92E7-B288D846FA57.jpeg
    F280FA9F-048C-4EF8-92E7-B288D846FA57.jpeg
    1.8 MB · Views: 325
Last edited:

Surveyor

Well-known member
Yes, the latches do appear large but they do not protrude any further into the cargo space than the widow trim and maybe a bit less than the trim.
A word of caution if you are thinking of of ever returning a NAS D90 or NAS 110 to stock there is no going back after you install these windows.
 

JimC

Super Moderator
Staff member
Very cool, never fitted a pair of those. Latch mechanism is quite large.

I love those windows, there a huge leap forward from the original one on the market that had maybe 60% of the opening in glass. They had a wide solid area at the bottom that the latches were installed into. My only misgivings about putting these in my 90 is losing the ability to open the windows and ventilate.
 

MountainD

Technical Excellence Contributor
I love those windows, there a huge leap forward from the original one on the market that had maybe 60% of the opening in glass. They had a wide solid area at the bottom that the latches were installed into. My only misgivings about putting these in my 90 is losing the ability to open the windows and ventilate.

I was hoping they were like the original sunroofs...where the latch opens them maybe 3 inches "or" detaches and you open them the entire way. Is this not the case? Are they either open or closed?
 

JimC

Super Moderator
Staff member
Assembled my Allisport XL intercooler and radiator after finally remembering to order the little rubber mounting grommets. Randy Kramer sourced these for me, there was a delay of some months but the communication was good. I used titanium fasteners to assemble the frame because they’re black, don’t corrode, and I’m a fan of over-doing things.

Hopefully I don’t have any of the pinhole problems that other Allisport customers have reported in the last few months...
 

Attachments

  • 4DB2026E-7158-4E5D-9B27-2EEC2873CC1B.jpeg
    4DB2026E-7158-4E5D-9B27-2EEC2873CC1B.jpeg
    4.4 MB · Views: 265
  • 73AECAA0-A704-4661-898E-D7BB5CABF6E8.jpeg
    73AECAA0-A704-4661-898E-D7BB5CABF6E8.jpeg
    3.7 MB · Views: 266

Surveyor

Well-known member
I was hoping they were like the original sunroofs...where the latch opens them maybe 3 inches "or" detaches and you open them the entire way. Is this not the case? Are they either open or closed?
There is no intermediate latch position, the window is either open or closed
 

Uncle Douglas

Well-known member
Callsign: delete
A word of caution if you are thinking of of ever returning a NAS D90 or NAS 110 to stock there is no going back after you install these windows.
Pls excuse my ignorance, why is this ? Did you have to remove material/open up the aperture ?
 

Surveyor

Well-known member
Pls excuse my ignorance, why is this ? Did you have to remove material/open up the aperture ?
The aperture is the same the gullwings slip right in however the gullwing mounting flange is larger than the stock window flange and it is bolted on not using the rivet holes of the stock window. The bolt holes are outboard of the rivet holes. When going back to stock the bolt holes would be showing through the side panel.
 

SARTech

Well-known member
I spy a USCG sticker in your rear window! Im a old retired Coastie AD/AMT1 ret. Those gull wing windows are very nice.
 

Surveyor

Well-known member
I spy a USCG sticker in your rear window! Im a old retired Coastie AD/AMT1 ret. Those gull wing windows are very nice.
Served from 1971 -1975 mustered out as a DC2 Served on USCGC Chase WHEC 718 and on USCGC Munro WHEC 724, 2 Ocean Stations, 2 x War Sea Trials at Guantanamo Bay, crewed on the Munro from Boston through the Panama Canal to Seattle and served at Base Seattle.
I am proud to have served in the Guard and enjoyed my 4 years of service.
 
Top