RDavisinVA
Technical Excellence Contributor
Motor mount fixtures we made for the metal motor mounts to go from the engine over to the V8 chassis mounts.
There is also a pair for the 4 cylinder pre-300TDI chassis mounts.
The metal fabrication shop uses these and some thin aluminum pieces to scribe into 1/4" steel, cut the shapes, drill the holes and then hold the individual pieces for welding.
Makes mount fabrication easier and all the mounts are dimensionally the same.
There is also a pair for the 4 cylinder pre-300TDI chassis mounts.
The metal fabrication shop uses these and some thin aluminum pieces to scribe into 1/4" steel, cut the shapes, drill the holes and then hold the individual pieces for welding.
Makes mount fabrication easier and all the mounts are dimensionally the same.